Pre-Fabricated Steel Mezzanines and Mezzanine Storage Platforms

Steel Mezzanines

Prefabricated Steel Mezzanines

DOUBLE YOUR STORAGE CAPACITY BY UTILIZING UNUSED OVERHEAD SPACE

Simply fill in the information below

See IMPORTANT INFORMATION about steel mezzanines BELOW, at the bottom of this page

First select the TYPE of mezzanine deck below ...

(If the Mezzanine you need is irregularly shaped, fax us a sketch : 1-978-537-3498)

            ... then simply fill in the following specs:

Quantity:

Mezzanine Platform
LENGTH:

Mezzanine Platform
WIDTH:

Mezzanine
UNDER-CLEARANCE:

   Landing at top of stairway

Mezzanine
DECK CAPACITY, PSF*

Number of
STAIRWAYS for Mezzanine:

Include OPTIONAL Estimated Installation:
IMPORTANT: FILL OUT FORM BELOW

Mezzanine must meet BOCA Code
Pallet Truck will be used upon mezzanine *

Specify Rail Option (with mid-rails and toe boards) for mezzanine:

Pallet Gate 4 ft. wide        Pallet Gate 5 ft. wide

... now simply tell us where to send your Quick-Quote:

Privacy Policy: Source will not sell, release, or distribute any information you provide to anyone whomsoever.

Name

Title

Organization

Street address

Address (cont.)

City

State/Province

Zip/Postal code

Country

Work Phone

Fax

E-mail

If you requested an Installation Price,
you MUST provide the following information
in order for us to quote you a correct installation figure

Site Conditions:

Unloading of Material:

Building Site:

How far, approximately, from your receiving dock is the mezzanine to be located, (in feet):

Power Source available at at site (e.g. 220-440V/3ph/60hz): (multiple selections available)

Distance from power source to mezzanine location:

Is a forklift available to our installers at the site for use in erecting mezzanine?

Work Hours available to our Installers (multiple selections available):

Is a safety briefing required prior to start of work?

Site Work Conditions: (multiple selections available)

Any OTHER SPECIAL CONDITIONS we should be aware of, or any requirements
we should be notified of? If so, please briefly explain below:

Click the button above to search by keyword or category

no voice menus, no waiting ... just people to serve you

WHAT YOU SHOULD KNOW BEFORE BUYING A STEEL MEZZANINE

TO CALCULATE PSF (Pounds per Square Foot), multiply the length of the mezzanine X the
width and divide it by the MAXIMUM DISTRIBUTED load you anticipate will be stored upon it.

For example: if you have a mezzanine 10 ft. long X 8 ft. wide, the formula would be as follows: 1
0 X 8 = 80 square feet. You anticipate placing, say, 10,000 lbs. upon the deck, or platform,
(EVENLY distributed over the 80 square foot area – NOT 10,000 lbs. concentrated on, say, a
pallet, occupying only a 4' X 4' area).

10,000 lbs. divided by 80 square feet = a PSF of 125. You would then specify 125 PSF as your
deck's load-bearing capacity.

AS A RULE OF THUMB, 125 PSF is the most commonly specified capacity on any size
mezzanine. A 40' X 20' mezzanine with a 125 PSF capacity will be designed to hold 100,000 lbs
UNIFORMLY or EVENLY distributed over the entire 800 square foot area

A Special Note about Pallet Trucks: If you plan on using a pallet truck upon your
mezzanine, it is vital that we know it, for not only will this determine the suitability of the deck
required for the mezzanine, but also the understructuring.

A pallet truck carries its load on 3 CONCENTRATED points (the steering wheel below the handle, and the two load rollers at the end of the forks. Your ENTIRE LOAD is CONCENTRATED on these three small areas – each about only 3 inches square – NOT distributed over, say, a 4' x 4' area. That's A LOT of weight in 3 small areas!

Without proper deck beams and beam spacing, your mezzanine deck will not support this load!
The wheels of the hand truck will either crush the deck of the mezzanine, or the understructuring
will buckle and collapse. DO NOT use BAR GRATING if you will use a pallet truck, the wheels will not roll over it.

Properly understuctured plywood or smooth steel is your answer for using a pallet truck on your
mezzanine. Call us ... we'll help you with any questions you have!

___________________________________________________________

QUALITY!

Mezzanines of ANY Size from 8 ft. x 8 ft. to 300 ft. x 300 ft ... and larger!

Mezzanines of ANY Configuration, including offset elevations and cat-walks. Stairways and stairs are available as both OSHA and BOCA, with mid-landings as required and upper landings – all with rails to meet OSHA and BOCA requirements.

Mezzanines of ANY Capacity to meet your requirement. We design it to meet your needs. We will even tell you in our quote how much weight will be placed upon each column of your mezzanine to assist you in determining the suitability of the floor you wish to place it upon!

Name your mezzanine deck: plywood, bar grating, smooth steel or diamond plate. Place rails on all sides, two sides, or one side only – or have no rails at all – you tell us what YOU need!

Our mezzanines are both modular and reconfigurable. If your needs change, your mezzanine changes with them. OSHA and BOCA approved. Seismic rated.

Full C.A.D. Approval Drawings submitted to you prior to our fabrication of your mezzanine

Place an in-plant office upon your mezzanine – and double your office space! We'll even provide the office to your specifications.

... and, of course, if you wish, we will install the mezzanines (and the offices) that we provide

for an ALPHABETICAL LISTING of products see LEFT SIDE BAR

Pallet Racks - Dock Plates - Shelving - Platform Lifters - Wheelchair Lifts Scissor Lifts Mezzanines Strip Doors - Roll-Out Die Racks - Smoking Shelters Ergonomic Chairs In-Plant Offices Work Benches - Pre-Fab Offices - Wire Shelving Dock Plates and Levelers MetroMax Polymer Shelving Dock Lifters - Gravity Rollers Conveyors